欢迎光临 佛山市恩仕自动化设备有限公司网站!

混合压送装置 RELEASE AGENT MIXER

本机型采用固定原液计量缸,离型剂混合时,保持离型原液为固定量,配合浮球检知开关,达到稳定的混合效果,可配比范围在50倍至250倍。 本机型适用性广泛,可作为一般性离型剂混合,构造简易,维修保养容易之特性。

  • 1:混合稀释液位于下限时,原液缸和水阀自动打开,开始补充直到混合液液面上限为止
  • 2:原液下限时,黄色指示灯亮,警报灯闪,警报器响,请补充原液
  • 3:混合液输出压力(低于3Bar)不足时,请清洁或更换吸入口过滤网并检查空气压力(正常为0.5MPa以上)
  • 祥情信息

  

    This machine use fixed original liquid measuring tank. When release agent is mixing,it can keep ration release agent.With the ball sensor switch working,it can win a stable miming effect;the viscosity ratio can be adjusted from 50:1 up to 250:1. 

  Feature: The application of this machine is broad.It can be used for mixing common chemicals or special chemi-cals. Its assembly is simple and easy to maintain. 

   1.When the solution reaches the low level limit,the measuring pump and the water valve will automatically open,starts replenishing until the solution reaches the upper limit. 

   2.When the original release agent reaches the low level limit,the yellow light will turn on,and the alarm will sound,please replenish the release agent.
   3.When the solution output pressure is below 3bar,the red signal light will turn on the alarm will sound. Please clean or change inlet filter and check the air pressure(above 0.5Mpa as norm).


  1536212276(1).jpg

 

 

 


在线交流 - x

服务热线:

0757-85432629

游戏斗牛平台